Gear up for lambing

Jan
2019
14
SHARE:
Sheep   lamb pictures april 2017 33 blog detail

Good preparation after scanning will help you maximise the number of healthy newborn lambs you will have to finish this year. Volac Technical Officer Abi Erian takes you through a seven-step ‘gear up’ plan to help you make the 2019 lambing season your best yet.

1. Get pregnant ewe nutrition right (and boost colostrum quality). “70% of foetal growth takes place in the last six weeks of pregnancy so paying extra attention to ewe nutrition at this time is key. Get it wrong and you may have to cope with poor lamb survival rates, low birth weights and inferior quality ewe colostrum.”

Ewe colostrum is the first feed for the newborn lamb and the key to its survival.

https://www.youtube.com/watch?v=ZISWHOkgCYM

“It’s a highly nutritious energy source that helps the lamb to maintain body temperature and survive. It also contains antibodies that are vital to help protect the newborn lamb against disease."

“Remember the 3Q rule: Colostrum should be fed Quickly, in sufficient Quantity and be of the right Quality."

"It should also be sQueaky clean! Consequently, it makes sense to have some artificial colostrum available in case any ewe does not produce enough natural colostrum.”

https://www.youtube.com/watch?v=sQQVFXDdBNo

Ms Erian advises grouping and feeding ewes according to scanning results and their condition score. This will optimise nutrition during the critical last few weeks of pregnancy.

“Getting the mineral balance right is important too, so ask your nutritionist for advice."

"Consider asking your vet to take blood samples from ewes 4-6 weeks pre-lambing just to make sure their diet is delivering the required energy and protein status,” she says.

2. Prepare your sheep housing. Sheds should be thoroughly cleaned and disinfected before ewes are brought inside (at least two weeks before lambing).

“Use plenty of clean, dry bedding to reduce the risk of spreading infectious bacteria, which cause lameness and other infections such as watery mouth, joint ill and coccidiosis. Good lighting is important too because it makes it so much easier to check stock without disturbing them too much."

"Avoid overcrowding otherwise stress and disease issues can spiral out of control: a typical 70kg ewe needs 1.2m² to 1.4m² of floor space and 45cm of trough space.”

Find out more about bedding options for the lambing shed. 

3. Check your flock health plan. Remind yourself of the essential disease management interventions pre and post lambing.

“For example, don’t forget to boost your ewes’ clostridial disease and pasteurellosis cover 4-6 weeks pre-lambing."

Make sure any lame sheep are separated and treated well before housing. Check, too, the protocols for dealing with any abortion problems, scours or joint ill.”

4. Make sure you have a system in place for rearing surplus lambs.

Ad lib milk feeding systems using performance-formulated ewe milk replacer will help you safeguard triplet-bearing ewe condition, save labour and secure better lamb growth rates. “Why spend hours a day bottle-feeding when you could be prioritising your time elsewhere during a hectic lambing period?” The Ewe2 and Ewe2 Plus are thermostat controlled warm milk feeders, for rearing orphan/surplus lambs.

You can find out more about the features and benefits of the Ewe 2 feeder here.

5. Decide on staffing levels. Lambing is a time of year when an extra pair of hands can be invaluable. Have you got enough labour cover?

“Many flocks rely on students to help out, but it’s important to evaluate the level of help you need. Students vary in their experience and knowledge, so be clear when advertising for staff what level of skills and experience you are looking for."

Any new staff recruited need to know what is expected from them form the start and should be given clear management protocols so they know exactly what to do in any given situation.”

6. Stock up with the equipment and supplies you’ll need. Lambing is always hectic and once the season starts you won’t have the time to keeping dashing out for essential kit.

“You need to be focused on the job too. Get prepared and order well in advance materials such as disinfectant for pens, iodine for navels, castration rings, feeding tubes, marker sprays, sterilisation equipment, performance-formulated ewe milk replacer, colostrum replacer and any other lambing essentials.”

7. Set targets for reducing lamb losses. Good records are essential to benchmark performance and to help you identify any potential problem areas. “Your recording system doesn’t have to be sophisticated or complicated – the important thing is to do it well and if you don’t record already, lambing time is a great time to start!

"You should be aiming for less than 15% lamb losses, but top performing flocks are achieving closer to 10%.”

https://www.youtube.com/watch?v=AOmEYE1UFZ8

Targets for reducing lamb losses:


• Less than 5% from scanning to lambing
• Less than 5% during lambing and the first week of life
• Less than 2% from the first week until weaning
• Less than 2% from weaning until sale or retention

Ask your vet for advice if:


• Ewe losses are more than 3%
• Lamb losses are more than 15%
• More than 2% of your ewes are barren at scanning

For more advice and tips and to help get you through the lambing season, explore our handy lambing advice. Alternatively you can sign up to our e-newsletter and get all the latest advice directly to your inbox. 

Sign up to our enewsletter

Was this article useful? Sign up and we’ll send you more like this every month.

By signing up for our newsletter you will receive information about our services, products, advice, news and events. We will not use your details for any other purpose. You can unsubscribe at any time.